使用 BONDING 網路功能 by 小洲
Bonding 就是 Port Trunking.
兩張卡 Bonding 簡大致上的做法:
# modprobe bonding
# ifconfig bond0 192.168.1.1 netmask 255.255.255.0
# ifconfig eth0 down
# ifconfig eth1 down
# ifenslave bond0 eth0 eth1
# route add default gw 192.168.1.254 dev bond0
註: 使用 Bonding 必需使用 Switch, 不能用 Hub.
[Linux] Bonding
Categories:
Categories
Monthly Archives
- March 2009 (8)
- February 2009 (7)
- January 2009 (14)
- December 2008 (15)
- November 2008 (12)
- October 2008 (9)
- September 2008 (10)
- August 2008 (13)
- July 2008 (28)
- June 2008 (17)
- May 2008 (13)
- April 2008 (15)
- March 2008 (7)
- February 2008 (5)
- January 2008 (2)
- November 2007 (4)
- October 2007 (8)
- September 2007 (7)
- August 2007 (3)
- July 2007 (10)
- June 2007 (4)
- May 2007 (5)
- April 2007 (9)
- March 2007 (11)
- February 2007 (7)
- January 2007 (4)
- December 2006 (9)
- November 2006 (14)
- October 2006 (10)
- September 2006 (9)
- August 2006 (6)
- July 2006 (15)
- June 2006 (22)
- May 2006 (17)
- April 2006 (13)
- March 2006 (18)
- February 2006 (10)
- January 2006 (28)
- December 2005 (17)
- November 2005 (15)
- October 2005 (18)
- September 2005 (24)
- August 2005 (39)
- July 2005 (14)
- June 2005 (22)
- May 2005 (32)
- April 2005 (27)
- March 2005 (32)
- February 2005 (20)
- January 2005 (38)
- December 2004 (49)
- November 2004 (38)
- October 2004 (24)
- September 2004 (23)
- August 2004 (38)
- July 2004 (39)
- June 2004 (38)
- May 2004 (17)
- April 2004 (32)
- March 2004 (15)
- February 2004 (6)
- January 2004 (19)
- December 2003 (19)
- November 2003 (15)
- October 2003 (15)
- September 2003 (12)
- August 2003 (20)
- July 2003 (26)
Search
March 2009
About this Entry
This page contains a single entry by Pank published on August 19, 2006 2:29 AM.
RAR 3.60 was the previous entry in this blog.
[FreeBSD] Enable active mode FTP behind NAT is the next entry in this blog.
Find recent content on the main index or look in the archives to find all content.
Leave a comment